New flooring is one of the most visible upgrades in an office, shop or home, and one of the easiest to misprice. The same 1,000 sq ft can cost a few thousand dollars in vinyl or carpet tiles, or several times that in timber, stone or microcement, before anyone talks about hacking out the old floor.
This guide puts published 2026 flooring prices in Singapore side by side: vinyl (SPC and LVT), office carpet tiles, epoxy, floor tiling, laminate, parquet and engineered timber, microcement, marble, raised floors and the cost of removing old flooring. Every figure links to the page it comes from, checked on 17 October 2026. Many sources quote HDB and condo prices, so homeowners can use the same numbers. Prices are indicative and shown as each source publishes them, not averaged. For whole fit-outs, see our office renovation cost guide and retail shop renovation cost guide.
Flooring cost in Singapore: the short answer
Published 2026 rates put supply-and-install flooring at roughly S$3–9 per sq ft for most vinyl (SPC or LVT), with premium grades up to about S$12, S$3.50–10 per sq ft for office carpet tiles (one supplier lists from S$2.60 on larger orders) and S$3–15 per sq ft for epoxy, depending on the system. Floor tiles run about S$8–18 per sq ft, engineered timber about S$9–30, solid parquet up to about S$55, and marble or natural stone S$40–70+. Removing old floor tiles adds about S$3–5 per sq ft, and screed levelling about S$1.50–5. Small jobs often carry a minimum charge.
Published flooring prices (2026)
We checked each page on 17 October 2026. Note whether a rate covers supply and installation or labour only, and whether hacking, levelling, skirting and disposal are inside the figure. Several sources state that they are not.
| Flooring type | Published price (indicative) | Source and notes |
|---|---|---|
| SPC and LVT vinyl, supply and install | SPC S$4.50–7.50 psf, premium EIR SPC S$6–9 (Shiok Living); SPC S$4.80–7.50, LVT S$4.50–6.50, WPC S$6.50–8, glue-down S$3.20–5.50 (ANB) | Shiok Living, ANB; Shiok Living rates assume overlay on sound tiles, hacking extra |
| Vinyl, material plus labour split | Standard LVT S$4.70–7.50 psf; premium LVT S$7.50–12; SPC click-lock S$5.50–8.80; overlay sheet S$3.80–6.50 | Fortified; install labour shown as S$0.80–2.50 psf within these totals |
| Commercial vinyl for offices and shops | Open-plan office S$3.20–4.80 psf; retail and F&B dining S$4–4.40; herringbone S$4.90 (LN Flooring); standard commercial LVT S$3.50–8, premium SPC S$6–12 (Xin Furnishing) | LN Flooring, Xin Furnishing |
| Office carpet tiles, installed | Basic S$4.50–6 psf; standard commercial S$6–8; premium S$8–10+ (ANB); office grade S$3.50–4.80, designer S$4.80–6.50, acoustic S$6.50–8 (Reno Guys) | ANB, Reno Guys |
| Carpet tiles, supply and lay by box | S$99–124 per box (4–6 sqm); S$350 to lay up to 5–7 boxes; S$2.60–3.20 psf including tiles and labour beyond that | U Office; supplier’s own price list |
| Carpet tile laying, labour only | S$1.50 psf basic; S$2–2.50 standard commercial; up to S$3 for complex layouts | ANB |
| Office fit-out benchmarks | Carpet tiles S$6–10 psf; vinyl S$7–12; raised floor installation S$10–15 | GetContractor fit-out guide; fit-out planning rates |
| Epoxy floor coating | Roller coat S$3–6 psf; PU S$5–10; flake S$6–11; self-levelling S$6–12; anti-slip or ESD S$8–15 | Terris, Rayson; one HDB toilet about S$650–1,200 (Rayson) |
| Floor tiles, supply and install | Ceramic S$8–12 psf; porcelain S$10–18 psf; hacking extra | Shiok Living |
| Tiling labour by tile size | S$6 psf (600×600 mm, HDB) up to S$11 (1200×1200 mm, condo); materials and tiles S$2–15 psf extra | Shiok Living tiling |
| Laminate | S$6–11 psf, supply and install | Shiok Living |
| Engineered timber and parquet | Engineered S$9–18, solid teak or merbau S$12–25 (Terris); engineered S$15–30, solid S$30–55 (Shiok Living); engineered S$10–22, solid S$18–45 (Sin Hao) | Terris, Shiok Living, Sin Hao |
| Parquet re-sanding and varnish | S$3.50–6 psf; about S$450–900 per room (Terris); one bedroom S$350–450 oil-based (R&S) | Terris, R&S Polishing |
| Marble or natural stone | S$40–70+ psf, supply and install | Shiok Living |
| Floor polishing | Marble S$1.30 psf (S$2.50 with marble gum and re-grouting); homogeneous tile or granite S$4.50 psf | R&S Polishing |
| Microcement | Calculator rate S$12 psf for floors, 1.2× wastage, minimum S$2,800 (MicroLux); kitchen floor S$2,500–4,000, living room S$4,000–8,000 (Artilo) | MicroLux, Artilo |
| Removing old flooring | Floor tile hacking S$3–5 psf, debris disposal S$300–800 (Shiok Living); removing vinyl, laminate or parquet S$2–5 psf (Goodrich) | Shiok Living hacking, Goodrich |
| Office reinstatement: floor removal | Carpet or vinyl tiles S$1.50–4 psf; raised access floor S$2.50–5 psf | BSM Engineering |
| Levelling, skirting and doors | Screed S$1.50–5 psf; skirting S$1.50–6 per linear ft (Shiok Living); door trimming S$30–50 per door, transition strips S$5–15 per linear ft (Goodrich) | Shiok Living, Goodrich |
What drives flooring cost
- Material and grade: wear layer, thickness and brand move vinyl and carpet within their bands; species and board size move timber.
- Overlay or hack: Shiok Living says SPC can overlay sound tiles in most HDB resale flats, while tiles, parquet and engineered wood need the old floor hacked first, at about S$3–5 psf.
- Subfloor condition: uneven, hollow or damp screed needs levelling or a moisture barrier before vinyl, timber or epoxy goes down.
- Pattern and layout: herringbone, chevron and diagonal layouts take longer and waste more material than straight laying.
- Size of the job: ANB notes larger offices get better rates per sq ft, while small jobs carry minimum charges (for example U Office‘s S$350 laying charge for a few boxes).
- Access and working hours: offices and malls often restrict noisy work to nights or weekends, which adds labour cost.
- Extras: skirting, transition strips, door trimming, furniture moving and debris disposal are often itemised separately.
What is usually included, and what is not
A supply-and-install rate normally covers the flooring, adhesive or underlay, and labour. Shiok Living says vinyl rates should include basic skirting, while its tile rates exclude hacking and disposal. Goodrich lists underlay, moisture barrier and self-levelling as separate items. Often charged separately:
- hacking or removing the existing floor, and debris disposal;
- screed levelling, moisture barriers and crack repair;
- skirting, nosing, transition strips and door trimming;
- furniture moving, and night or weekend work;
- HDB renovation permits for hacking, and condo or building deposits;
- GST, and post-renovation cleaning.
Plan the clean-up too: our post-renovation cleaning cost guide covers what it costs after hacking and new flooring. For bathroom floors and waterproofing, see our toilet renovation cost guide.
Flooring for offices, shops and commercial premises
Commercial floors take far more traffic than homes. LN Flooring recommends vinyl with a 0.5 mm wear layer for offices, retail and F&B dining, with slip-rated porcelain over a waterproofing membrane in kitchens and wash areas. It also schedules commercial installs for evenings, weekends or one zone at a time so the space keeps trading.
For open-plan offices, carpet tiles remain common because single tiles can be replaced. ANB puts a typical 2,000–3,000 sq ft office carpet tile project at S$12,000–24,000. Offices with heavy cabling may use a raised access floor, which GetContractor budgets at S$10–15 psf to install, with carpet or vinyl laid on top. Workshops, warehouses, clinics and showrooms often choose epoxy; anti-slip and ESD systems cost the most.
At lease end, most landlords want tenant flooring removed. GetContractor Reinstatement lists removal of floor finishes and carpets in its reinstatement scope, and BSM Engineering prices carpet or vinyl removal at S$1.50–4 psf. See our office reinstatement cost guide. Ceilings and walls are separate trades: see the false ceiling and painting cost guides.
Some flooring and fit-out businesses to ask for a quote
The first two entries are featured partners; the others are not ranked and none paid to appear. Descriptions summarise each company’s own website or SG Directory listing. More firms are in the Commercial Fit-Out directory.
- GetContractor Renovation (SG Directory listing · website): the renovation arm of Trends Interior Design Pte Ltd, a direct fit-out contractor for offices and shops since 1999. Its in-house team handles flooring and tiling with carpentry, electrical, partitions, plumbing and painting, and gives a scoped quote within 24 hours.
- GetContractor Reinstatement (SG Directory listing · website): Trends Interior Design’s reinstatement team for offices and shops, covering removal of floor finishes and carpets, flooring reinstatement, debris disposal and MCST or landlord submissions at lease end.
- Lexsure Flooring (SG Directory listing · website): supplies and installs commercial flooring, including luxury vinyl tiles, ESD flooring, HPL raised floors and sports flooring, plus floor polishing services.
- Concept Tiling (SG Directory listing · website): tiling-led renovation since 2017, covering tiling with waterproofing, hacking and demolition, plumbing and carpentry for homes and commercial spaces.
- Simply Wood (SG Directory listing · website): timber flooring specialist offering engineered, solid and hybrid wood floors, decking and sports flooring.
- Cosmos Decor (SG Directory listing · website): renovation and interior design firm with an in-house carpentry workshop, handling office, retail and F&B renovation as well as homes.
How to get an accurate flooring quote
- Measure the floor area, or send the floor plan, and say which rooms or zones are included.
- Describe the current floor and send photos, including any hollow, cracked or uneven areas.
- Name the product or grade you want (wear layer, thickness, carpet range, timber species) so quotes are comparable.
- Ask whether hacking, levelling, skirting, disposal and GST are included.
- For offices and shops, share the building’s working hours and fit-out rules before the quote.
Red flags
- A per-sq-ft price with no product name, thickness or wear layer.
- No mention of floor preparation when the existing floor is uneven or hollow.
- Tile hacking in an HDB flat without a renovation permit.
- A rate far below published bands with no written scope.
- No warranty, invoice or business details for the installer.
Flooring cost: FAQ
How much does vinyl flooring cost per sq ft in Singapore?
Published 2026 rates put SPC and LVT at about S$4.50–7.50 psf supplied and installed, with premium grades at S$6–12 psf. Commercial LVT lists from about S$3.20 psf. Hacking, if needed, is extra.
How much do office carpet tiles cost?
About S$3.50–10 psf installed, depending on grade. Labour alone is about S$1.50–3 psf. One supplier lists S$2.60–3.20 psf including tiles for larger orders.
How much does epoxy flooring cost in Singapore?
About S$3–6 psf for a roller-applied coating, S$6–12 for self-levelling epoxy and S$8–15 for anti-slip or ESD systems. A single HDB toilet is often a minimum-charge job at about S$650–1,200.
Do I need to hack my old floor before new flooring?
Not always. Vinyl and laminate can often overlay sound tiles, but new tiles, parquet and most engineered timber need hacking first, at about S$3–5 psf plus disposal. HDB hacking needs a permit.
How much is floor tiling per sq ft?
Ceramic tiles are about S$8–12 psf and porcelain S$10–18 psf supplied and installed. Labour alone is about S$6–11 psf, rising with tile size.
Get free flooring quotes
Tell us your premises, floor area and the flooring you have in mind, and we’ll connect you with Singapore flooring and fit-out contractors who can quote for free.
